选择语言

Star Ribbon Pre-stained Protein Marker (2.7-40 kDa)

用户评价
货号-规格
价格
Qty.
PPM-M1002-500ul (250ul X 2)
¥1490.00
PPM-M1002-2500ul (250ul X 10)
¥7320.00
合计0件 产品金额¥ 0

产品详情

  • 产品描述(Product Details)

    This product is a mixture of nine highly purified pre-stained proteins ranging from 2.7 kDa to 40 kDa. The 40 kDa band is orange, 10 kDa band is green, and other bands are blue. It is designed for observing protein separation during SDS-PAGE, verifying western transfer efficiency on membranes, and approximating the size of proteins.

  • 产品特性(Product Features)

    1. Three Pre-Stained Color
    2. Neat, Bright and Well-distributed Bands
    3. More Accurate Molecular Weight Position
  • 储存Buffer(Storage Buffer)

    20 mM Tris-H3PO4 (pH 7.5), 2 mM EDTA, 1.5 % (W/V) SDS, 3 mM DTT, 0.1% (V/V) Proclin300, 15 % (V/V) Glycerol.

  • 运输和储存(Shipping and Storage)

    The product is shipped with blue ice. Upon receipt, store it immediately at -20°C for long term storage.
    This product is stable after storage at:

    1. -20°C for up to three years or 4°C for up to two months.


  • 使用方法(Procedure)

    1. Thaw the product at room temperature for a few minutes to dissolve precipitated solids. Do not boil!
    2. Mix gently, but thoroughly, to ensure the solution is homogeneous.
    3. Load the following volumes of the product on an SDS-PAGE:

    1. – 3-5 μL per well for mini gel
    2. – 5-10 μL per well for large gel


    Use the same volumes for Western blot. The loading volumes listed above are recommended for gels with a thickness of 0.75-1.0 mm. The loading volume should be doubled for 1.5 mm thick gels.

  • 产品规格(Product Specification)

    Number of Bands 9
    Size Range 2.7 to 40 kDa
    Stain Type 3 colors: Blue, Orange, Green
    Molecular Weight 40, 30, 25, 20, 15, 10, 6.5, 4.2, 2.7 kDa
    Quantity 2 x 250 ul, 10 x 250 ul
    System Type SDS-PAGE, Western Blot
  • 注意事项(Notes)

    1. 1. This product has been prepared in 1× SDS-PAGE loading buffer and can be used directly without boiling, diluting and adding reducing agent.
    2. 2. Don’t add SDS to transfer buffer. If SDS must be used, the concentration should not exceed 0.02-0.04%.
    3. 3. In low-percentage gels (< 10 %), the low-molecular weight proteins in the ladder may migrate with the dye front.
    4. 4. Pre-stained proteins can have different mobilities in various SDS-PAGE-buffer systems. However, they are suitable for approximate molecular weight determination when calibrated against unstained standards in the same system. See the table provided for migration patterns in different electrophoresis conditions.
    5. 5. For your safety and health, please wear a lab coat and disposable gloves.
  • 质量管理控制体系(QMS)

    1. 质量管理体系(ISO, GMP)
    2. 质量优势
    3. 质控流程

产品展示

  • 电泳(SDS-PAGE)

    PPM-M1002 SDS-PAGE

    SDS-PAGE band profile of the Star Ribbon Pre-stained Protein Marker

用户评价
发表评论

前沿进展

 
联系我们
项目合作
查看更多项目
  • 产品SKU
  • 产品详情
  • 产品展示
  • 用户评价